Ventilation Options; Setting Preferences - Honeywell Home VisionPRO 8000 Manual

Ventilation Options

Mode:
Auto: Ventilation runs as programmed by the installer.
Off: Ventilation remains off unless turned on using the
timer.
On: Ventilation is always on.
Ventilation Mode
Off Auto
Fig. 130.

Temporary Boost: Touch
ventilation temporarily. To turn it off, set it to zero.
Run Ventilation For
60 minutes
Fig. 131.
 
Lockout: Touch or to select Yes or No, then touch Next.
Select Yes to prevent ventilation from running during the
Sleep or Unoccupied (commercial) program periods or
when outdoor conditions exceed values set by the installer.
Lockout in Sleep
Period:
Fig. 132.
On
MCR34135

or to select how long to run
MCR34136
No
MCR34137

Setting Preferences

Preference menu options let you select how the thermostat
displays information or responds to certain situations.
1. Touch MENU and select Preferences.
Preferences
Clean Screen
2. Select an option and follow prompts:
• Reminders to change filters
• Fahrenheit/Celsius display
• 12/24-hour clock display
• Display Options
–Backlighting (Continuous or On Demand)
–Inactive Backlight (Backlight level while the
screen is not in use. Requires C wire and
Backlighting must be set to Continuous.)
–Screen Contrast
• Alert light options
• Scheduling options
• Adaptive recovery
• Default schedule
• Daylight saving time
Reminders
Fahrenheit/Celsius
3. Touch Done to save your settings. Touch Cancel to
ignore changes.
69
®
VISIONPRO 8000 WITH REDLINK™
MCR34100
Fig. 133.
MCR34170
Fig. 134.
MCR34139
Fig. 135.
68-0312—06