Table of Contents
Advertisement
®
VISIONPRO
8000 WITH REDLINK™
3. Touch
or
to select the Heat and Cool tempera-
tures, then touch Next to select return date.
Temperature
While Away
Fig. 114.
4. Review the settings and touch Done to save them.
Touch Cancel to ignore the changes.
NOTE: The cool temperature can only be set higher than
the unoccupied program setting and the heat
temperature can only be set lower than the unoc-
cupied program setting.
Initiating Occupancy Mode:
Commercial Use
This feature keeps temperature at an energy saving level
until you touch Press HERE to Start Occupancy. When you
arrive, touch the message to maintain a comfortable
temperature while the room is occupied.
Press
Start Occupancy
Fig. 115.
Touch the
or
buttons to set the temperature or the
Hold Until time. The temperature is maintained until the
time you set. Temperature returns to an energy-saving level
after the timer expires, or the "Occupied" period ends.
NOTE: This feature is available only when programmed by
the installer.
68-0312—06
MCR34123
HERE
to
M34127
Remote Setback: Commercial Use
During Occupied program periods, an occupancy sensor
directs the thermostat to go to REMOTE SETBACK settings
when the room is empty. If someone is in the room, it uses
the Occupied program period settings. The thermostat
ignores the occupancy sensor during Unoccupied program
periods.
If the thermostat is set up to be non-programmable, the
sensor directs the thermostat to go to REMOTE SETBACK
settings when the room is empty. If someone is in the room,
then it follows the settings set by the user.
Depending on how your thermostat was installed, it may
delay for up to 30 minutes before switching to REMOTE
SETBACK settings. This delay allows the room to stay
comfortable if the room is unoccupied for only a short time.
Adjusting Humidification Settings
1. Touch MENU and select Humidification.
Humidification
Window Protection
2. Select Auto.
Humidification
Off
3. Touch
or
to select humidity level.
4. Touch Done to save your settings. Touch Cancel to
ignore changes.
66
MCR34100
Fig. 116.
MCR34128
Fig. 117.
Auto
MCR34129
Fig. 118.
Hide quick links:
Advertisement
Table of Contents
