Portable Comfort Control - Honeywell Home VisionPRO 8000 Manual

®
VISIONPRO 8000 WITH REDLINK™

PORTABLE COMFORT CONTROL

The Portable Comfort Control communicates wirelessly
with the thermostat, and can control up to 16 thermostats.
NOTE: Each thermostat can only be connected to
1 Portable Comfort Control.
If you have one thermostat, you move this remote control
from room to room (like a portable thermostat), to make
sure the temperature is comfortable in the room you're
using. If you have multiple thermostats, you can view and
adjust the temperature in each room from the Portable
Comfort Control.
If you have one thermostat, temperature is measured at the
thermostat (Fig. 302) or Portable Comfort Control
(Fig. 303), as you choose.
Fig. 302. Reading temperature at the thermostat.
68-0312—06
Fig. 303. Reading temperature at the Portable Comfort
If the thermostat is being averaged with remote indoor
sensors, and you select THERMOSTAT on the Portable
Comfort Control, you will see the temperature average from
the remote indoor sensors and the thermostat.
NOTE: If the thermostat is not part of the temperature
average, then you will only see the temperature
average from the remote indoor sensors when you
select THERMOSTAT on the Portable Comfort
Control.
If the thermostat is being averaged with remote indoor
sensors, and you select THIS DEVICE on the Portable
Comfort Control, you will see the temperature measured at
the Portable Comfort Control only.
If you have multiple thermostats, temperature is measured
at each thermostat. Press the TOGGLE ZONE arrows to
choose which room to display and adjust. See Fig. 304.
Fig. 304. Portable Comfort Control used with Multiple
Thermostats. Temperature is measured at each
112
Control.
thermostat.