Table of Contents
Advertisement
Z-Wave setup
After you finish the installer setup and set the
date and time, you will be asked to set up a
Z-Wave to include the thermostat into Z-Wave
network.
• Touch Yes to include the thermostat in to
Z-Wave network, or touch No if you want this to
be done later.
• You'll be asked to set your primary controller
to INCLUDE MODE. Please refer to the user
manual of your Z-Wave controller.
• After inclusion procedure has been initiated
on your Z-Wave controller, touch Select on the
thermostat.
• If the inclusion procedure is successful,
INCLUDED, the node ID, and the Z-Wave connected status icon appear on the
screen. If the procedure fails, FAILED TO INCLUDE appears on the screen. If this
happens, position the thermostat closer to the Z-Wave controller and repeat the
inclusion procedure.
• Your controller will indicate whether the thermostat was successfully added to its
network. (Please refer to the user manual of your Z-Wave controller.)
NOTES:
• This thermostat will function as a normal programmable thermostat with the
default program schedule if not included in a Z-Wave network. Once you include
the thermostat in to Z-Wave network, it assumes to be programmed from your
Z-Wave controller and the program schedule on the thermostat is turned OFF by
default. For more information, see "Scheduling options" on page 12.
• To include or exclude the thermostat from Z-Wave network after initial thermostat
setup, go to thermostat MENU/Z-WAVE SETUP.
• Before adding the thermostat to a Z-Wave network, check that it does not already
belong to one. If the thermostat is included in Z-Wave network, it offers an option
to exclude. If the thermostat is excluded from Z-Wave network, it offers an option
to include. You can also check the status by viewing the Node ID located in the
thermostat MENU/DEVICE INFO. An excluded thermostat should show zero for
the Node ID (000).
• Whether you are including or excluding the thermostat from Z-Wave network, first
you have to initiate it on your Z-Wave controller. Please refer to the user manual of
your Z-wave controller.
• For other specific tasks such as adding the thermostat to home automation
scenes or groups, refer to the user manual of your Z-Wave controller.
No
Cancel
9
Yes
Back
Select
Advertisement
Table of Contents
