Finding Your Password (Date Code) To Access Installer Options - Honeywell Home VisionPRO 8000 Manual

®
VISIONPRO 8000 WITH REDLINK™
NOTE: The thermostat can work with up to 6 Vent Boost
remotes.
Finding Your Password (Date Code)
to Access Installer Options
You need a password (Date Code) to access Installer
Options. Installer Options allow you to:
• Make changes to the Installer Setup.
• Perform an Installer Test.
• Add, remove, rename or view connected RedLINK
accessories.
• Reset the thermostat to Factory Default settings.
The password (Date Code) is located on the back of the
thermostat. It can also be found by following these steps:
1. Touch Menu.
2. Select Dealer Information.
Dealer Information
Installer Options
Fig. 57.
3. Scroll down to see the Date Code.
TH8321R1001
Date Code:
Fig. 58.
68-0312—06
MCR34022
1324
MCR33975
Thermostat Password (Date Code)
Fig. 59. Locate password.
The following options are available when you access
Installer Options. For more information on each, press Help
on the thermostat or see Table 2.
20
RoHs Compliant
Conformité RoHs
Assembled in Mexico
Assemblé au Mexique
1
M37810A
Password
(Date Code)
Scroll to see:
Installer Setup
Installer Test
Data Logs
Wireless Manager
Reset To Defaults
Device Info
Fig. 60.