Honeywell Home VisionPRO 8000 Manual page 47

ISU Installer Setup
Number Name
N.O. when Fan Runs
616 Fan Failure Alert is
N.C. when Fan Runs
[See Settings]
None
617 Custom Alert
S1
S2
S3
S4
Normally Open
618 Custom Alert is [See
Settings] Normally Closed
View/Edit Custom Alert
619 Custom Alert Name
View/Edit Custom Alert
620 Cust Alert Message
None
700 Filter Type
Elec. Air Cleaner
Media
1 to 2
702 Number of Air
Filters
Off
711 Air Filter 1
Reminder
Run Time:
Note: "1" is not
10, 20, 30, 45, 60, 90, 120, 150
displayed if there is
days
only 1 filter.
Calendar:
30, 45, 60, 75 days
3, 4, 5, 6, 9, 12, 15 months
Table 3. Installer Setup (ISU) Table. (Continued)
Settings Default
N.C. when Fan
Runs
None
Normally Open
View/Edit
Custom Alert
View/Edit
Custom Alert
Media
1
Off
47
VISIONPRO
Residential,
Commercial Requires
or Both EIM
Both Yes Dry Contact Alerts require an EIM (Equipment
Interface Module).
Choose an option appropriate for the type of
device installed:
Normally Open when Fan is Running: The Dry
Contact device is open when the fan is running
and will close when the fan is not running.
Normally Closed when Fan is Running: The Dry
Contact device is closed when the fan is running
and will open when the fan is not running.
Both Yes Dry Contact Alerts require an Equipment Interface
Module.
Select the terminals wired to the Custom Dry
Contact Device.
Both Yes Dry Contact Alerts require an EIM (Equipment
Interface Module).
Choose an option appropriate for the type of
device installed:
Normally Open: The Dry Contact device is
normally open and will close when the device
detects a problem.
Normally Closed: The Dry Contact device is
normally closed and will open when the device
detects a problem.
Both Yes Dry Contact Alerts require an EIM (Equipment
Interface Module).
Enter a name for the custom alert dry contact. The
thermostat displays this name including a brief
message (entered on the next screen - ISU 620)
when a dry contact device detects a problem.
Both Yes Dry Contact Alerts require an EIM (Equipment
Interface Module).
Enter a message for the custom alert dry contact.
The thermostat displays this message when a dry
contact device detects a problem.
Both No
Both No
Both No
®
8000 WITH REDLINK™
Notes
68-0312—06