Completing Initial Setup; Adding Redlink Accessories To The Thermostat - Honeywell Home THX9321 Prestige 2.0 Manual

Completing Initial Setup

5. Finish the setup by selecting the desired options.
Touch Done after you select the last option you want
to change. See "Installer Options" beginning on
page 21 for a full listing of setup options.
Fig. 35. Scheduling options.
6. The thermostat now displays its Home screen and the
thermostat setup is complete.
Fig. 36. Thermostat home screen.
Adding RedLINK Accessories to the
Thermostat
If you want to add RedLINK accessories after the
thermostat has been setup, follow these steps.
1. Touch Menu.
2. Select Installer Options.
Installer Op ons
Fig. 37.
®
THX9321 PRESTIGE 2.0 AND THX9421 PRESTIGE
3. Enter password (date code) and touch Done. See
"Finding Your Password (Date Code) to Access
Installer Options" beginning on page 20 for more
information.
4. Select Wireless Device Manager.
Wireless Device Manager
5. Select Add Device to display the Add Device screen.
The thermostat is now in listening mode.
NOTE: Accessories must be at least 2 feet away from the
thermostat or EIM during the linking process.
17
®
IAQ WITH EIM
Done
Fig. 38.
Fig. 39.
Add Device
Fig. 40.
68-0311—08