Honeywell Home VisionPRO 8000 Manual page 41

ISU Installer Setup
Number Name
None
412 Residential:
40° F to 90° F
Entry / Exit Remote
- Home Heat
Setpoint
Note: setpoint is limited based on
setting at ISU 410.
Commercial:
Entry / Exit Remote
- Occupied Heat
Setpoint
None
413 Residential:
50° F to 99° F
Entry / Exit Remote
- Away Cool
Setpoint
Note: setpoint is limited based on
setting at ISU 410.
Commercial:
Entry / Exit Remote
- Unoccupied Cool
Setpoint
None
413 Residential:
40° F to 90° F
Entry / Exit Remote
- Away Heat
Setpoint
Note: setpoint is limited based on
setting at ISU 410.
Commercial:
Entry / Exit Remote
- Unoccupied Heat
Setpoint
None
414 Residential:
Entry / Exit Remote 50° F to 99° F
- Vacation Cool
Setpoint
Note: setpoint is limited based on
setting at ISU 410.
Commercial:
Entry / Exit Remote
- Holiday Cool
Setpoint
None
414 Residential:
40° F to 90° F
Entry / Exit Remote
- Vacation Heat
Setpoint
Note: setpoint is limited based on
setting at ISU 410.
Commercial:
Entry / Exit Remote
- Holiday Heat
Setpoint
No
500 Wired Sensor on S
Yes
Terminals
No
500 Wired Remote
Indoor Sensor Yes
No
500 Wired Outdoor
Yes
Sensor
No
500 Wired Return
Yes
Sensor
Table 3. Installer Setup (ISU) Table. (Continued)
Settings Default
70° F
78° F
65° F
82° F
60° F
No
No
No
No
41
VISIONPRO
Residential,
Commercial Requires
or Both EIM
Both No The thermostat maintains this Heat setting when
the user presses Home / Occupied at the Entry /
Exit Remote. Select None to delete this
temperature setting. The thermostat only
responds to the Entry / Exit Remote if a
temperature is pre-set at this screen. See "Wireless
Entry/Exit Remote" beginning on page 111.
Both No The thermostat maintains this Cool setting when
the user presses Away / Unoccupied at the Entry /
Exit Remote. Select None to delete this
temperature setting. The thermostat only
responds to the Entry / Exit Remote if a
temperature is pre-set at this screen. See "Wireless
Entry/Exit Remote" beginning on page 111.
Both No The thermostat maintains this Heat setting when
the user presses Away / Unoccupied at the Entry /
Exit Remote. Select None to delete this
temperature setting. The thermostat only
responds to the Entry / Exit Remote if a
temperature is pre-set at this screen. See "Wireless
Entry/Exit Remote" beginning on page 111.
Both No The thermostat maintains this Cool setting when
the user presses Vacation / Holiday at the Entry /
Exit Remote. Select None to delete this
temperature setting. The thermostat only
responds to the Entry / Exit Remote if a
temperature is pre-set at this screen. See "Wireless
Entry/Exit Remote" beginning on page 111.
Both No The thermostat maintains this Heat setting when
the user presses Vacation / Holiday at the Entry /
Exit Remote. Select None to delete this
temperature setting. The thermostat only
responds to the Entry / Exit Remote if a
temperature is pre-set at this screen. See "Wireless
Entry/Exit Remote" beginning on page 111.
Both No This ISU is only displayed if an S1–S4 terminal is
available.
Both No The thermostat will not display the Wired Remote
Indoor Sensor option if 6 wireless indoor air
sensors are already connected to the thermostat. If
you have a wired Indoor Air Temperature network
(1, 4, 9 etc), the thermostat will allow up to 5
wireless indoor air sensors.
Both No The thermostat will not display the Wired Outdoor
Sensor option if a wireless outdoor air sensor is
already connected to the thermostat.
Both Yes The thermostat will not display the Wired Return
Sensor option if there is no fan in the system.
®
8000 WITH REDLINK™
Notes
68-0312—06