Profimess SW-08 Operating Instructions Manual page 80

These instructions facilitate the safe
and efficient handling of a flow monitor
(referred to as "device" in the fol-
lowing). The instructions are an inte-
gral part of the device and must be
kept within easy reach for the per-
sonnel in the immediate vicinity of the
device at all times. Personnel must
carefully read and understand these
instructions before commencing all
work. The basic requirement for safe
work is adherence to all safety and
handling instructions stipulated in
these instructions. The local accident-
prevention regulations and general
safety standards and regulations for
the field of application of the device
also apply. Illustrations in these
instructions are provided to aid general
understanding and might deviate from
the actual model. No claims can be
derived from any such differences.
Limitations of liability
All details and instructions in this
manual have been compiled under
consideration of the valid standards
and regulations, the current state-of-
technology and our many years of
knowledge and experience. The manu-
facturer does not accept any liability
arising from:
n non-observance of any details in
these instructions
n improper use of the device, or use
that is not in accordance with
these instructions
n use of non-trained personnel
23.02.2015
Supplemental instructions
n unauthorized retrofitting or tech-
nical changes that have not been
authorized by the manufacturer
use of non-approved spare parts
n
The duties and obligations agreed
upon in the delivery contract apply in
full, as well as the general terms and
conditions, the terms of delivery by the
manufacturer and the valid legal regu-
lations applicable at the conclusion of
the contract.
Copyright
These operating instructions are pro-
tected by copyright.
Except for internal purposes, transfer
of these instructions to third-parties,
copying them in any way
– even in part – as well as dissemina-
tion and/or communication of their con-
tent is forbidden without prior written
authorization from PROFIMESS
("manufacturer"). Violations
are subject to claims for indemnifica-
tion. The manufacturer reserves the
right to assert additional claims.
Copyright is the property of the manu-
facturer.
3