Profimess SW-08 Operating Instructions Manual page 139

Maintenance
Maintenance > Assembly
Fig. 49: Tighten process connection
(inlet)
Using a proper sized fixed
5.
spanner, tighten the process
connection (inlet). Hold the
device body in place using a
suitable fixed spanner (Fig. 49),
and observe the proper torque
( Ä Chapter 11.1 "Tightening
torque" on page 78).
62
Fig. 50: Inner parts
Insert spring (Fig. 50/3) with
6.
magnets (Fig. 50/2) into the float
(Fig. 50/1) ensuring proper mag-
netic pole orientation (north pole
toward device outlet).
23.02.2015