Profimess SW-08 Operating Instructions Manual page 220

Maintenance
Maintenance > Assembly
Fig. 51: Tighten process connection
(inlet)
Using a proper sized fixed
7.
spanner tighten the process con-
nection (inlet). Hold the device
body in place using a suitable
fixed spanner (Fig. 51), and
observe the proper torque
( Ä Chapter 11.1 "Tightening
torque" on page 79)
62
Fig. 52: Inner parts
Insert spring (Fig. 52/01) with
8.
magnets (Fig. 52/02) into the
float (Fig. 52/03) ensuring proper
magnetic pole orientation (north
pole toward device outlet)
20.02.2015