Profimess SW-08 Operating Instructions Manual page 307

Lightly seat the threaded ring
11.
(outlet) with the aid of the
threaded ring insertion tool and
tighten with a torque wrench
(Fig. 62), observing the proper
torque ( Ä Chapter 11.1 "Tight-
ening torque of screws"
on page 85)
Fig. 63: Insert process connection
(outlet)
12. Insert the process connection
(outlet) into the device body
(outlet) (Fig. 63)
23.02.2015
Fig. 64: Tighten process connection
(outlet)
Using a proper sized fixed
13.
spanner tighten the process con-
nection (outlet). Hold the device
body in place using a suitable
fixed spanner (Fig. 64), and
observe the proper torque
( Ä Chapter 11.1 "Tightening
torque of screws" on page 85)
Maintenance
Maintenance > Assembly
67