Safety
Special precautions > Mechanical hazards
–
Never bridge fuses or put
them out of operation. Always
observe the correct current
ratings when replacing fuses
–
Keep moisture away from live
parts. This can result in short-
circuit
12
2.3.2 Mechanical hazards
WARNING!
Risk of injury due to fractured
housing and leakage!
Unauthorized temperatures or
excessive pressure may cause the
flow monitor body or the process
connections to burst. Injuries may
be caused by flying parts and
escaping media.
–
Keep within the stipulated
operating conditions
–
Wear personal protective
equipment
–
Avoid severe temperature fluc-
tuations
–
Avoid pressure surges
CAUTION!
Risk of injury on sharp edges
and pointed corners!
Sharp edges and pointed corners
can cause abrasions and skin
cuts.
–
Proceed with caution when
working near sharp edges and
pointed corners
–
If in doubt, wear protective
gloves
20.02.2015