Profimess SW-08 Operating Instructions Manual page 281

Fig. 24: Disconnect the screw connec-
tion
Disconnect the screw connec-
4.
tion (Fig. 24/1) by turning in the
direction of the arrow
Guide the connection cable
5.
through the screw connection in
the socket
6. Make the connections as shown
in the connection diagram
(Fig. 25 and Fig. 26)
Place the inner section (Fig. 23)
7.
back into the socket and push
until it locks on.
Retighten the screw connection
8.
(Fig. 24/1) by turning it to the
right.
23.02.2015
Installation and initial startup
Plug the socket onto the connec-
9.
tion plug and tighten the fixing
screw (Fig. 21/1)
Fig. 25: Pin assignment, plug socket,
Normally Open Contact (Form 30x70)
Plug connection
41