Profimess SW-08 Operating Instructions Manual page 189

Varible area flowswitch
Table of Contents

Advertisement

WARNING!
Risk of injury from media in the
pipe system!
If the pipe system contains haz-
ardous media, severe injuries may
be caused by escaping media.
Before installation, ensure that
the pipe system is empty and
does not contain any media
residue
Always wear personal protec-
tive equipment during installa-
tion
Provide suitable draining
devices (collection tanks, etc.)
NOTICE!
Risk of damage to the device
due to contamination in the pipe
system!
Dirt and foreign particles entering
the device can damage the device
and impair its operation.
Ensure that the pipe system is
clean before installing the
device
If necessary, flush the pipe
system with clean medium
before installation.
20.02.2015
Installation and initial startup and Operation
A suitable sealant must be
selected depending on the condi-
tion/composition of the pipe lines,
the medium and the operating and
environmental conditions. The
sealing method described here is
only an example and cannot be
used in all cases.
Installation in the pipe system
31

Advertisement

Table of Contents
loading

Table of Contents