Profimess SW-08 Operating Instructions Manual page 131

Maintenance
Disassembly
Remove fixing screws from the
1.
display housing cover (Fig. 32)
Fig. 33
2. Carefully remove the display
housing cover plate and plastic
housing from the display base
plate by lifting straight up.
(Fig. 33) Take care not to
damage the pointer mechanism.
54
Fig. 34
Press out the display cover plate
3.
from the plastic housing (Fig. 34)
Fig. 35
Pull the scale support (with
4.
affixed scale) from the guides in
the plastic housing (Fig. 35)
Fig. 36
Loosen fixing screws from the
5.
display base plate (Fig. 36) then
remove the display base plate
from the device.
23.02.2015