Disassembly And Disposal; Safety; Disassembly - Profimess SW-08 Operating Instructions Manual

Disassembly and disposal

Disassembly

9 Disassembly and disposal
After its period of useful life, the device
must be disassembled and disposed of
in an environmentally safe manner.

9.1 Safety

WARNING!
Risk of injury if disassembled
incorrectly!
Media residue, sharp edged com-
ponents, pointed ends and corners
on and in the device or on tools
may cause injuries.
– Ensure that the site is suffi-
ciently cleared before com-
mencing work
– Always wear protective equip-
ment when handling dan-
gerous media residue
– Handle open, or sharp-edged
components carefully
– Ensure that the workplace is
orderly and clean! Compo-
nents and tools that are lying
about or on top of each other
are potential causes of acci-
dents
– Disassemble components pro-
fessionally
– Secure components so that
they do not fall or overturn
– In case of doubt, contact the
manufacturer
66
9.2 Disassembly
Before starting disassembly:
n Remove operating materials and
packaging and dispose of properly.
Personnel:
n Qualified personnel
Protective equipment:
n Protective gloves
n Goggles
Remove the device from the
1.
pipeline ( Ä Chapter 8.3
"Removal from the pipe system"
on page 51)
2. Disassemble the device
( Ä Chapter 9.2 "Disassembly"
on page 66)
Clean components properly and
3.
remove media residue
Dispose properly
4.
20.02.2015