CAUTION!
Risk of injury due to damaged
parts!
If parts of the device are broken or
damaged, they may cause injury
due to sharp edges or splinters
during the cleaning process.
–
Damaged parts must be
replaced
–
Carefully clean the parts of the
device, so as not to cause
damage.
–
When cleaning, always wear
appropriate personal protec-
tive equipment.
–
Incorrect disassembly can
result in injuries.
20.02.2015
Protective equipment:
n
With hazardous media, the protec-
tive equipment specified in the
Safety Data Sheet of the medium
must be worn. In addition, the
specifications of the system oper-
ator must be followed. If no protec-
tive equipment is specified, suit-
able protective gloves and goggles
must be worn.
8.5.2 Parts replacement
Depending on the operating conditions,
wear parts such as O-rings, float or
magnets may have to be replaced.
Steps required to replace these parts
correspond to those used when
assembling the device.
Ä
Chapter 8.5.3 "Assembly"
on page 59.
8.5.3 Assembly
After cleaning the individual compo-
nents, the flow monitor must be reas-
sembled.
Maintenance
Maintenance > Assembly
59