Disassembly - Profimess SW-08 Operating Instructions Manual

Maintenance

Disassembly

WARNING!
Risk of injury from media in the
pipe system!
If the pipe system contains haz-
ardous media, severe injuries may
be caused by escaping media.
– Before removing the device,
ensure that the pipe system is
empty and does not contain
any media residue
– Always wear personal protec-
tive equipment when removing
the device
WARNING!
Risk of injury from media res-
idue in the device!
After the pipe system has been
emptied, media residue can still be
present inside the device. In the
case of hazardous media, this
could result in serious injuries.
– When removing (de-installing
the device from the pipe
system), always wear per-
sonal protective equipment.
– All requirements specified in
the media safety data sheet
must be observed in accom-
plishing the work task.
– Residue of hazardous media
in the device can result in
serious injuries.
52
Removing the device from the pipe
system
Personnel:
Qualified personnel
n
Protective equipment:
n With hazardous media, the protec-
tive equipment specified in the
Safety Data Sheet of the medium
must be worn. In addition, the
specifications of the system oper-
ator must be followed. If no protec-
tive equipment is specified, suit-
able protective gloves and goggles
must be worn.
Tool:
Fixed spanner
n
1. Loosen the adapter union of the
pipe line using a suitable
spanner. When doing so, lock
the process connection or
device body in place with a
second spanner.
Secure the device against falling
2.
and repeat Step 1 at the other
process connection.
8.4 Disassembly
To replace wear parts or to clean the
device, the flow monitor must first be
disassembled.
23.02.2015