Profimess SW-08 Operating Instructions Manual page 272

Installation and initial startup
Installation in the pipe system
WARNING!
Risk of injury from pressurized
pipes!
If the pipe system is under pres-
sure when installing the device,
severe injuries may result.
– Depressurize the pipe system
before installing the device
WARNING!
Risk of injury from hot or cold
surfaces!
Pipelines can heat up/cool down
dramatically due to the media
flowing through them. Skin contact
with hot or cold surfaces may
cause severe skin burn or frost
bite.
– Before commencing work,
ensure that the system has
been controlled to a tempera-
ture range between 0 und 40
°C.
– Do not touch any parts of the
system that are either very hot
or very cold.
– Always wear heat-resistant/
cold-resistant protective
clothing and protective gloves
when working near hot/cold
surfaces.
32
WARNING!
Risk of injury from media in the
pipe system!
If the pipe system contains haz-
ardous media, severe injuries may
be caused by escaping media.
– Before installation, ensure that
the pipe system is empty and
does not contain any media
residue
– Always wear personal protec-
tive equipment during installa-
tion
– Provide suitable draining
devices (collection tanks, etc.)
NOTICE!
Risk of damage to the device
due to contamination in the pipe
system!
Dirt and foreign particles entering
the device can damage the device
and impair its operation.
– Ensure that the pipe system is
clean before installing the
device
– If necessary, flush the pipe
system with clean medium
before installation.
23.02.2015