Transport, Packaging And Storage; Safety Instructions For Transport; Transport Inspection; Packaging - Profimess SW-08 Operating Instructions Manual

4

Transport, packaging and storage

4.1 Safety instructions
for transport
Improper transport
NOTICE!
The device could be damaged if
transported improperly!
Objects to be transported may fall
or overturn if transported incor-
rectly. This can result in damage to
the device and/or property.
– Proceed carefully when
unloading transported pack-
ages, both on delivery and
when transporting in-house.
Observe the symbols and
instructions on the shipping
box
– Only remove packaging imme-
diately before assembly
23.02.2015
Transport, packaging and storage
4.2 Transport inspec-
tion
On delivery, make an immediate check
for completeness and check for trans-
port damages.
If there are any visible external trans-
port damages then proceed as follows:
n Do not accept the delivery
n Note the damage in the shipping
documents or on the delivery note
of the transporter and have the
driver confirm by signature
Initiate a claim for damages
n
Make a claim for each fault as
soon as it is detected. Claims for
damages can only be invoked
within the valid claim periods.

4.3 Packaging

About packaging
The packaging serves to protect the
individual components from transport
damages, corrosion and other dam-
ages until they are installed. Do not
discard the packaging and only remove
the device from the shipping box
immediately before installation.
Packaging
23