Profimess SW-08 Operating Instructions Manual page 27

Only install the flow monitor in one of
the positions displayed in the drawing.
The medium must flow in the direction
of the arrow (from a low to a high scale
value).
20.02.2015
Installation and initial startup
Unimpeded flow sections
NOTICE!
Measuring inaccuracy due to
incorrect installation!
The measuring accuracy of the
flow monitor is influenced by its
position within the pipe system.
Changes in cross-section, branch-
offs or bends in the pipe system
impair measuring accuracy.
– Ensure that the unimpeded
flow sections are maintained
– Never reduce the pipe diam-
eter immediately before the
device
We recommend unimpeded flow
sections, type BE-01.
Preparatory work
27