Lubricants - Profimess SW-08 Operating Instructions Manual

11.5

Lubricants

Before using a lubricant, always make sure that it is compatible with the oper-
ating medium.
For the proper mounting of O-rings, an O-ring installation tool may be purchased
from the manufacturer.
The following lubricants are suitable to facilitate installing the O-rings:
Lubricant
Glycerine*
Soapy water
* Glycerine must not be used if the device is used for sulfuric acid and/or nitric
acid.
20.02.2015
O-ring material
NBR
suitable
suitable
EPDM
suitable
suitable
Annex
Lubricants
FKM
suitable
suitable
77