Profimess SW-08 Operating Instructions Manual page 299

Fig. 46: Remove inner parts
Carefully turn the device body
11.
180° and remove the inner parts
(float, magnets and spring)
(Fig. 46)
Fig. 47: Spring, magnets and float
23.02.2015
The inner parts of the flow mon-
12.
itor consist of the spring
(Fig. 47/1), magnets (Fig. 47/2)
and float (Fig. 47/3).
Fig. 48: Loosen process connection
(inlet)
13. Loosen the process connection
(inlet) (Fig. 48) using the proper
sized fixed spanner wrench.
Hold the device body in place
using a proper sized spanner
wrench
Maintenance
Disassembly
59