Cable; Degree Of Protection (Ip-Code); Grounding The Device; Plug Connection - Profimess SW-08 Operating Instructions Manual

Fig. 20: Switch position under no-flow
condition

5.6.3 Cable

The individual cores of the cable are
numbered according to the following
connection diagrams.
Wiring diagram
normally open:
change over:
Switch position under no-flow condition
23.02.2015
Installation and initial startup
5.6.4 Degree of protection
(IP-Code)
The specified degree of protection (IP)
is only ensured if approved connection
material is used (see following table).
Device Specifi-
connec- cation
tion of con-
nection
material
DIN Diameter
43650 of con-
with Pg nection
gland cable: 6–
8 mm
M12x1 Plug
con-
nector
M12x1
Cable -
5.7 Grounding the
device
When installing the device in a pipe
system, ensure that the device is
grounded to the pipe system to avoid a
dangerous electrical potential differ-
ence.

5.8 Plug connection

Plug connection
Degree of
protection
IP65
IP67
IP67
39