Installation In The Pipe System - Profimess SW-08 Operating Instructions Manual

Installation and initial startup

Installation in the pipe system

5.4 Installation in the
pipe system
WARNING!
Risk of injury from pressurized
pipes!
If the pipe system is under pres-
sure when installing the device,
severe injuries may result.
– Depressurize the pipe system
before installing the device
30
WARNING!
Risk of injury from hot or cold
surfaces!
Pipelines can heat up/cool down
dramatically due to the media
flowing through them. Skin contact
with hot or cold surfaces may
cause severe skin burn or frost
bite.
– Before commencing work,
ensure that the system has
been controlled to a tempera-
ture range between 0 und 40
°C.
– Do not touch any parts of the
system that are either very hot
or very cold.
– Always wear heat-resistant/
cold-resistant protective
clothing and protective gloves
when working near hot/cold
surfaces.
20.02.2015