Profimess SW-08 Operating Instructions Manual page 62

Maintenance
Maintenance > Assembly
Fig. 49: Insert threaded ring (outlet)
Insert the threaded ring (outlet)
8.
into the device body (outlet)
(Fig. 49)
Fig. 50: Seat threaded ring (outlet)
62
Lightly seat the threaded ring
9.
(outlet) with the aid of the
threaded ring insertion tool and
tighten with a torque wrench
(Fig. 50), observing the proper
torque ( Ä Chapter 11.1 "Tight-
ening torque" on page 74)
Fig. 51: Insert process connection
(outlet)
10. Insert the process connection
(outlet) into the device body
(outlet) (Fig. 51)
20.02.2015