Maintenance - Profimess SW-08 Operating Instructions Manual

Maintenance

Maintenance
Fig. 44: Loosen process connection
(inlet)
Loosen the process connection
13.
(inlet) (Fig. 44) using the proper
sized fixed spanner wrench.
Hold the device body in place
using a proper sized spanner
wrench.
58
Fig. 45: Remove process connection
(inlet)
Unscrew the process connection
14.
(inlet) from the device body
(Fig. 45). If necessary, remove
the O-ring from the process con-
nection.
O-ring replacement
It is recommended that the O-rings
be replaced during maintenance.
8.5 Maintenance
23.02.2015