Profimess SW-08 Operating Instructions Manual page 39

Fig. 22: Disconnect inner section
Remove the inner section from
3.
the socket by inserting a flat-
bladed screwdriver into the slot
(Fig. 22/01) and carefully pry out
the inner section.
20.02.2015
Installation and initial startup
Fig. 23: Disconnect the screw connec-
tion
Disconnect the screw connec-
4.
tion (Fig. 23/01) by turning to the
right
Guide the connection cable
5.
through the screw connection in
the socket
Make the connections as shown
6.
in the connection diagram
(Fig. 24 and Fig. 25)
Place the inner section (Fig. 22)
7.
back into the socket and push
until it locks on
Plug connection
39