Profimess SW-08 Operating Instructions Manual page 205

Conduct in case of malfunction
The complete machine or system may
be unsafe if there is a defect at the flow
monitor (e.g. fractured housing).
The following always applies:
In case of malfunctions that
1.
present an immediate danger to
persons or valuables, proceed
according to the valid emer-
gency plans for the system
2. Determine the cause of the mal-
function
Before repair, ensure that there
3.
is no danger to persons from
escaping media
If necessary, allow the pipeline
4.
and device to cool down or to
warm up before commencing
work
Malfunctions must be corrected
5.
by qualified personnel
The following troubleshooting
guide provides an indication of
who is qualified to repair the fault .
20.02.2015
Troubleshooting
Safety
47