Profimess SW-08 Operating Instructions Manual page 197

Fig. 22: Disconnect inner section
Remove the inner section from
3.
the socket by inserting a flat-
bladed screwdriver into the slot
(Fig. 22/1) and carefully pry out
the inner section.
20.02.2015
Installation and initial startup and Operation
Fig. 23: Disconnect the screw connec-
tion
Disconnect the screw connec-
4.
tion (Fig. 23/1) by turning in the
direction of the arrow
Guide the connection cable
5.
through the screw connection in
the socket
6. Make the connections as shown
in the connection diagram
(Fig. 24 and Fig. 25).
Place the inner section (Fig. 22)
7.
back into the socket and push
until it locks on.
Retighten the screw connection
8.
(Fig. 23/1) by turning it to the
right.
Plug connection
39