Profimess SW-08 Operating Instructions Manual page 60

Maintenance
Maintenance > Assembly
Fig. 45: Insert process connection
(inlet)
Insert the process connection
4.
(inlet) into the device body (inlet)
(Fig. 45)
60
Fig. 46: Tighten process connection
(inlet)
Using a proper sized fixed
5.
spanner tighten the process con-
nection (inlet). Hold the device
body in place using a suitable
fixed spanner (Fig. 46), and
observe the proper torque
( Ä Chapter 11.1 "Tightening
torque" on page 74)
20.02.2015