Profimess SW-08 Operating Instructions Manual page 219

Fig. 48: Insert threaded ring (inlet)
Insert the threaded ring (inlet)
4.
into the device body (Fig. 48)
Fig. 49: Seat threaded ring (inlet)
Lightly seat the threaded ring
5.
(inlet) with the aid of the
threaded ring insertion tool. and
tighten with a torque wrench
(Fig. 49), observing the proper
torque ( Ä Chapter 11.1 "Tight-
ening torque" on page 79)
20.02.2015
Fig. 50: Insert process connection
(inlet)
Insert the process connection
6.
(inlet) into the device body (inlet)
(Fig. 50)
Maintenance
Maintenance > Assembly
61