Profimess SW-08 Operating Instructions Manual page 138

Carefully install the O-rings
1.
(Fig. 46/2) with the aid of the O-
ring installation tool (Fig. 46)
onto both process connections
(inlet and outlet), so that they
are properly seated in the O-ring
grooves of the process connec-
tion (Fig. 47). When doing so, be
careful not to overstretch the O-
rings.
Fig. 47: Properly positioned O-ring
Position the O-ring properly on
2.
the process connection (Fig. 47).
Lubricate the O-rings lightly.
3.
A list of suitable lubricants is
contained in the annex
Ä Chapter 11.5 "Lubricants"
on page 81.
23.02.2015
Fig. 48: Insert process connection
(inlet)
Insert the process connection
4.
(inlet) into the device body (inlet)
(Fig. 48).
Maintenance
Maintenance > Assembly
61