Degree Of Protection (Ip-Code); Grounding The Device; Plug Connection - Profimess SW-08 Operating Instructions Manual

Installation and initial startup and Operation

Plug connection

5.6.4 Degree of protection
(IP-Code)
The specified degree of protection (IP)
is only ensured if approved connection
material is used (see following table).
Device Specifi-
connec- cation
tion of con-
nection
material
DIN Diameter
43650 of con-
with Pg nection
gland cable: 6–
8 mm
M12x1 Plug
con-
nector
M12x1
Cable -
5.7 Grounding the
device
When installing the device in a pipe
system, ensure that the device is
grounded to the pipe system to avoid a
dangerous electrical potential differ-
ence.
5.8 Plug connection
38
Degree of
protection
IP65
IP67
IP67
Personnel:
n Qualified electrician
Tool:
Flat-bladed screwdriver
n
Fig. 20: Detach socket
Release the fixing screw
1.
(Fig. 20) from the socket
Fig. 21: Remove socket
Remove socket (Fig. 21/01)
2.
20.02.2015