Preparatory Work - Profimess SW-08 Operating Instructions Manual

n The flow monitor must be installed
in such a way as to preclude
damage by outside force. It must
be ensured that the flow monitor
cannot be damaged. If necessary,
install an appropriate impact pro-
tection device.
n External macnetic fields will influ-
ence the switch contact. Keep suf-
ficient distance to magnetic fields
(e.g. electric motors).
Piping, process connections or
n
supports made from ferromagnetic
material influence the magnetic
field of the device. Keep a space
of minimum 100mm to those mate-
rials (e.g. steel).

5.3 Preparatory work

The following criteria must be met
during installation to ensure correct
functioning of the flow monitor:
23.02.2015
Installation and initial startup
WARNING!
Danger due to incorrect installa-
tion!
If the criteria listed above are not
met when installing the flow mon-
itor, dangerous/hazardous situa-
tions may arise.
– Do not install the flow monitor
as a supporting part in a pipe
system
– Do not use the flow monitor
with quick-acting valves
– Do not use the flow monitor
with solenoid valves
Preparatory work
27