Connector Din 43650 - Profimess SW-08 Operating Instructions Manual

– Secure against switching
back on
– Check for absence of
voltage
– Ground and short
– Cover or cordon off other
live parts in the vicinity
– Never bridge fuses or put
them out of operation. Always
observe the correct current
ratings when replacing fuses
– Keep moisture away from live
parts. This can result in short-
circuit
23.02.2015
Installation and initial startup
Electrical connection > Connector DIN 43650
5.6.1 Connector DIN
43650
Wiring diagram of the supplied
socket (DIN 43650, Form A) (Front
view).
Wiring diagram
normally open:
Fig. 14: Switch position under no-flow
condition
Fig. 15: Pin assignment, plug socket,
normally-open contact. The ground-pin
is not used.
change over:
37