Profimess SW-08 Operating Instructions Manual page 300

Maintenance
Disassembly
Fig. 49: Remove the process connec-
tion (inlet)
Unscrew the process connection
14.
(inlet) from the device body
(Fig. 49). If necessary, remove
the O-ring from the process con-
nection.
60
Fig. 50: Insert threaded ring insertion
tool (inlet)
Insert the threaded ring insertion
15.
tool into the device inlet (Fig. 50)
and turn until it rest in the
keyway of the threaded ring
Fig. 51: Loosen threaded ring (inlet)
23.02.2015