Profimess SW-08 Operating Instructions Manual page 304

Maintenance
Maintenance > Assembly
Fig. 55: Insert threaded ring (inlet)
Insert the threaded ring (inlet)
4.
into the device body (Fig. 55)
Fig. 56: Seat threaded ring (inlet)
Lightly seat the threaded ring
5.
(inlet) with the aid of the
threaded ring insertion tool. and
tighten with a torque wrench
(Fig. 56), observing the proper
torque ( Ä Chapter 11.1 "Tight-
ening torque of screws"
on page 85)
64
Fig. 57: Insert process connection
(inlet)
Insert the process connection
6.
(inlet) into the device body (inlet)
(Fig. 57)
23.02.2015