Profimess SW-08 Operating Instructions Manual page 215

Fig. 42: Remove the process connec-
tion (inlet)
Unscrew the process connection
9.
(inlet) from the device body
(Fig. 42). If necessary, remove
the O-ring from the process con-
nection.
20.02.2015
Fig. 43: Insert threaded ring insertion
tool (inlet)
Insert the threaded ring insertion
10.
tool into the device inlet (Fig. 43)
and turn until it rest in the
keyway of the threaded ring
Fig. 44: Loosen threaded ring (inlet)
Maintenance
Disassembly
57