Install 3300 Icp As A Stand-Alone Voice Mail; Install The 3300 In-Line Power Unit - Mitel 3300 ICP Hardware User's Manual

3300 ICP Hardware User Guide

Install 3300 ICP as a Stand-alone Voice Mail

The 3300 ICP can be used as a voice mail system adjunct to a legacy or third party PBX.
To install as a stand-alone voice mail system:
1. Install the 3300 ICP Controller.
2. Install the System ID Module.
3. Connect power to the 3300 Controller. The controller will come up, in 15 to 20 minutes,
with factory-installed software.
4. To check the connections between the 3300 Controller and the PC:
PING the 3300 Controller IP address
FTP to the 3300 Controller IP address
Go to the 3300 Controller URL address (http://192.168.1.2).
5. Launch browser to login to the System Administration Tool (http://192.168.1.2 -- username
is system, password is password).
6. License and Option Selection form
- program number of digital links, voice mail licences, and country variant.
- If OPS Manager is being used to manage the voice mail select Yes in the Networking
Option field.
7. Reboot the system.
8. Controller Module Configuration form. Select the Programmed Module Type.
9. Network Services Unit Configuration form. Set the type of NSU and the protocol to be used.
10. Program digital trunks Q.SIG or MSDN/DPNSS
11. Program voice mail as per instructions in System Administration Tool.
12. Perform a Backup.
13. Reboot the system.
14. Set the 3300 Controller (RTC) IP address through a communication program.
15. Install a Universal NSU.

Install the 3300 In-Line Power Unit

The 3300 In-Line Power Unit (PD-PH-4024/AC/48) is suited for use in an office environment
where it can be free standing or mounted in a standard 19-inch equipment rack. Alternatively,
the 3300 In-Line Power Unit can be rack-mounted in a wiring closet or equipment room. A
rack-mounting kit, containing two mounting brackets and six screws, is supplied with the 3300
In-Line Power Unit.
WARNING: Electrocution Hazard. Before connecting power to the 3300 In-Line Power
Unit, please refer to the Safety Instructions.
166 Release 3.3