Inserting And Removing Devices; Inserting The I/O Module; Figure 11: Inserting I/O Module (Example); Figure 12: Snap The I/O Module Into Place (Example) - WAGO 8FDI 24V PROFIsafe 750-662/000-004 Manual

44 Mounting
5.2

Inserting and Removing Devices

5.2.1

Inserting the I/O Module

1. Position the I/O module in such a way that the groove and spring are
connected to the preceding and following components.

Figure 11: Inserting I/O Module (Example)

2. Press the I/O module into the assembly until the I/O module snaps into the
carrier rail.

Figure 12: Snap the I/O Module into Place (Example)

3. Check that the I/O module is seated securely on the carrier rail and in the
assembly. The I/O module must not be inserted crooked or askew.
Manual
Version 1.0.0, valid from HW/SW Version 01/01
WAGO I/O System
750-662/000-004 8FDI 24V PROFIsafe