Display panel components
Identify the main components of the display panel (also known as the home page).
ID
Component
A
Projector Information
B
Projector and Component
Controls
C
Power and Temperature
D
Status
E
IP Settings
F
Test Pattern
G
Input
IR/wired remote keypad
The IR/wired remote keypad controls the projector by way of either wireless communications from a
battery-powered infrared (IR) transmitter or a wired interface.
To use the IR remote, direct the keypad toward the projector's front or rear IR sensor and select a
function key. One of the two IR sensors on the projector detect the signal and relay the commands for
internal processing. The remote also offers a connector for wired connections to the projector.
Christie Griffyn Series Installation and Setup Guide
020-103314-12 Rev. 1 (07-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Description
Provides information about the projector such as the projector
name, serial number, software version, and projector ID.
Indicates the states of the projector and its components.
Indicates the light source mode, power mode, and intake
temperature.
Contains information about the health of the projector including
the number of warnings and errors.
Provides access to the status system.
Displays the IP address and subnet values.
Provides access to changing the IP settings.
Displays the currently selected test pattern. If no test pattern is
selected, Off is displayed.
Provides access to the list of test patterns.
Displays the signal for the currently selected input.
Provides access to the list of input signals.
Installation and setup
28