Display Panel Components - Christie Mirage 304K Installation And Setup Manual

Display panel components

Identify the main components of the display panel (also known as the home page).
ID Component
A Status
B IP Settings
C Test Pattern
D Input
E Power and Temperature
F Lamp Hours
G Projector and Component
Controls
H Projector Information
Mirage 304K (Bm.1) Installation and Setup Guide
020-102013-12 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Description
Contains information about the health of the projector including
the number of warnings and errors.
Provides access to the status system.
Displays the IP address and subnet values.
Provides access to changing the IP settings.
Displays the currently selected test pattern. If no test pattern is
selected, Off is displayed.
Provides access to the list of test patterns.
Displays the signal for the currently selected input.
Provides access to the list of input signals.
Indicates the incoming voltage, measured in Volts, and intake
temperature, measured in Celsius.
Displays the state of the lamps and the number of hours used.
Indicates the states of the projector and its components.
Provides information about the projector such as the projector
name, serial number, software version, and projector ID.
Installation and setup
20