Colors In The Display Are Inaccurate; Display Is Not Rectangular; Display Is "Noisy - Christie Roadie HD+35K Setup Manual

4.5.13Colors in the Display are Inaccurate

The color, tint, color space and/or color temperature settings may require adjustment at your input source, or in
the projector.

4.5.14Display is Not Rectangular

Check the following:
• Check leveling of the projector.
• Ensure the lens surface and screen are parallel to one another.
• Ensure the keystone setting is properly set.

4.5.15Display is "Noisy"

Check the following:
• Display adjustment at the input source may be required. Adjust pixel tracking, phase and filter. Noise is
particularly common on YPbPr signals from a DVD player.
• Ensure the video input is terminated (
input should be terminated at the last source input only.
• The input signal and/or signal cables carrying the input signal may be of poor quality.
• If the distance between the input source device and the projector is greater than 25 feet, signal amplification/
conditioning may be required.
• If the source is a VCR or off-air broadcast, detail may be set too high.
Roadie HD+35K Setup Guide
020-100394-06 Rev. 1 (10-2013)
75 
). If it is the last connection in a loop-through chain, the video
Section 4: Troubleshooting
4-5