Adjusting the image
size and position
Learn how to enable and modify projector image settings.
Activating the Intelligent Lens System
Activate the Intelligent Lens System (ILS) to automatically adjust the position of the lens.
1. In the left navigation menu, tap Service Setup > Preferences.
2. Tap Lens/ILS.
3. In the right pane, tap the ILS Installed slider.
The color of the slider changes to green to indicate the ILS is active.
Creating a new ILS file
Create an Intelligent Lens System (ILS) file to set the X, Y, zoom, and focus positions of the lens.
1. In the left navigation menu, tap Image Settings > ILS File Setup.
2. Tap Create ILS File.
3. Type a name for the ILS file and tap Create.
4. In the Lens position area, tap the forward, backward, left, or right arrow icons to move the
position of the image on the screen.
5. In the Focus area, tap Up (
6. In the Zoom area, tap Up (
7. Tap Save.
Calibrating the ILS automatically
Use the Auto Calibrate feature of the Intelligent Lens System (ILS) to find and compensate for motor
backlash, and to determine the movement range for the currently installed lens.
1. In the left navigation menu, tap Image Settings > ILS File Setup.
2. Tap Create.
3. Type a name for the ILS file and tap Create.
4. Tap Auto Calibrate.
5. Tap Continue.
CP2308 User Guide
020-102535-03 Rev. 1 (08-2018)
Copyright
2018 Christie Digital Systems USA, Inc. All rights reserved.
©
) or Down (
) to increase or decrease image focus.
) or Down (
) to increase or decrease image zoom.
48