Adjusting The Image Size And Position; Activating The Intelligent Lens System; Creating A New Ils File; Automatically Calibrating The Ils - Christie CP2309-RGB User Manual

Adjusting the image
size and position
Learn how to enable and modify projector image settings.

Activating the Intelligent Lens System

Activate the Intelligent Lens System (ILS) to automatically adjust the position of the lens.
On CP2309-RGB projectors, the ILS is enabled by default.
1. In the left navigation menu, select Service Setup > Preferences.
2. Select Lens/ILS.
3. In the right pane, select the ILS Installed slider.
The color of the slider changes to green to indicate the ILS is active.

Creating a new ILS file

Create an Intelligent Lens System (ILS) file to set the X, Y, zoom, and focus positions of the lens.
1. In the left navigation menu, select Image Settings > ILS File Setup.
2. Select Create ILS File.
3. Type a name for the ILS file and select Create.
4. In the Lens position area, select the forward, backward, left, or right arrow icons to move the
position of the image on the screen.
5. In the Focus area, select Up (
6. In the Zoom area, select Up (
7. Select Save.

Automatically calibrating the ILS

Use the Auto Calibrate feature of the Intelligent Lens System (ILS) to find and compensate for motor
backlash, and to determine the movement range for the currently installed lens.
1. In the left navigation menu, select Image Settings > ILS File Setup.
2. Select Auto Calibrate.
3. In the confirmation dialog, select Continue.
CP2309-RGB User Guide
020-103081-02 Rev. 1 (03-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
) or Down ( ) to increase or decrease image focus.
) or Down ( ) to increase or decrease image zoom.
52