Table of Contents
Advertisement
Record Playback (Opt 236)
Allows you to record SA traces and play them back at a
later time. You are allowed to change most SA settings
during a recording. Setting changes are recorded along
with the traces.
To record a new session:
Press Trace 6 then
Then
New Session
Optionally set the following
Record Time
Record Source
flow that data is recorded. RawMeas is easiest.
Record Interval
between individual trace recordings.
Segment Count
record.
FreqMaskTrigger
trigger a recording.
To play a session:
Press
Recall Session
Then
Recorder Player
Run/Hold can be used to Pause and Resume during
Record or Playback.
The maximum recording time is determined largely by
the amount of available memory. To maximize recording
time, select
SD
Card.
Record Playback Setup
,
Recorder
– limits record time.
– choose where in the FieldFox data
– sets the amount of time to wait
– sets the number of traces to
– sets the power level which will
select a session, press Open.
Storage Device
Player, then
Recording
then Play.
then
USB
12
Record
Configuration:
(flash drive) or
Advertisement
Table of Contents
