Running A Remote Desktop Session - Keysight Technologies UXA N9040B Getting Started And Troubleshooting Manual

Using Windows Tools
Remote Desktop: Using the X-Series Signal Analyzers Remotely
Table 4-5
Step
2. Double-click

Running a Remote Desktop session

Initializing a Remote Desktop session
To initialize a Remote Desktop Session, you need to know the Computer Name of the instrument.
After setting up the remote computer for Remote Desktop Connectivity, as
described in
ready to start a Remote Desktop session.
Table 4-6 Starting a session
Step
1. Click Windows >
>Programs,
Desktop Connection.
2. Enter the computer name of the
instrument.
3. Click
4. Enter the login account name and
password.
To see who the current user of the instrument is, press
instrument until you can view the current user name on the Start menu. If no one
is currently logged into the instrument, any valid instrument user can remotely log
in.
68
Locating the name from the Windows desktop (with a mouse):
System
"Setting up Remote Desktop operation" on page
Start menu
Accessories
>
Connect
.
Only the current User or an Administrator can remotely log into the instrument.
X-Series Signal Analyzers Getting Started and Troubleshooting Guide
Notes
The Computer name is listed in the Computer
name, domain, and workgroup settings
section.
Notes
A Remote Desktop Connection dialog appears:
Remote
A login dialog box appears.
The default account name is Instrument and the
default password is measure4u, but these
parameters may be changed by instrument users.
66, you are
Ctrl Esc
+ on the