Safety Instructions - ipf electronic opti-check Technical Documentation Manual

3 Safety instructions

Explanations of safety instructions
NOTE
Gives helpful notes on operation or other general recommendations.
ATTENTION!
Indicates a possibly dangerous situation. If this is not avoided,
slight or minor injury could result or the device may be damaged.
WARNING!
Indicates an immediate imminent danger. If this is not avoided, death or serious injury
may occur.
General notes / Safety instructions for the Vision Sensor
NOTE
There is a scratch-resistant foil on the glass cover of the tube for devices with
interchangeable lenses. Remove the foil before carrying out inspection tasks.
NOTE
For optimum electrical noise immunity, the use of shielded cables is recommended. The
appropriate cables can be obtained from the manufacturer.
NOTE
Networking problems can occur for a number of different reasons, such as power saving
modes on portable computers, defective cables or other defective components, or
incorrect settings on the PC. Should an error occur, contact a technician to locate the
source of the problem.
v2.8.2-K11 9/332
Technical Documentation
opti-check
ipf electronic GmbH
Lüdenscheid, Germany